« previous next »
Pages: [1]   Go Down

Author Topic: highway peg for shorter, older rider needed  (Read 2068 times)

0 Members and 1 Guest are viewing this topic.

Offline TnRider

  • Bicycle
  • *
  • Posts: 133
  • AREA: Southeast Area
  • COG#: 12484
  • Membership Level: Active
highway peg for shorter, older rider needed
« on: January 21, 2017, 08:14:38 am »
62 yo short, fat rider recently having more knee pain after long rides (miles or more).
I have tried Murph's highway pegs as well as the short highway pegs on his tip over bars to no avail.  I've also tried modified highway pegs to lower them and bring them closer to me without luck. I already have Murph's lowered pegs.

Has anyone tried to modify the C-14 foot peg illustrated below for a C-10?

Logged

Offline TnRider

  • Bicycle
  • *
  • Posts: 133
  • AREA: Southeast Area
  • COG#: 12484
  • Membership Level: Active
Re: highway peg for shorter, older rider needed
« Reply #1 on: February 02, 2017, 10:52:16 pm »
Well, looks like I figured this out and won't have to get a different bike.  Very solid feel. 
Logged

Offline The Wizard

  • Been riding since I was 9 yrs.old.getting to be old fart.
  • Crotch Rocket
  • ****
  • Posts: 1475
  • 'match need with source(used parts)'
    • have a need find a source/parts are parts
  • AREA: Southwest Area
  • COG#: 11328
  • Membership Level: Active
Re: highway peg for shorter, older rider needed
« Reply #2 on: February 02, 2017, 11:58:53 pm »
Can't see well enough to pass judgment (LOL) can you show pic from little further away?So as to get perspective.  Jerry Gaither
Logged
1964 Honda 55,1971 Honda CL 100,numerous Honda 350 twins,1971 Honda CL 450,1974 Honda CB 750(stolen),1971 Moto Guzzi Ambasador/Velorex sidecar,1975 Kawasaki Z1B
1976 Honda Goldwing (fully dressed)1973 Honda CB 450,1982 Yamaha Virago 750
1977 BMW R100/7(full dress) later Velorex sidecar mounted,1978 Yamaha XS750,1987 BMW K100RS
1996 Honda shadow 1100 ace,2000 Kawasaki Concours,1998,99,98,98+88,90+99 Concours for resurrection           CDA#540

Offline TnRider

  • Bicycle
  • *
  • Posts: 133
  • AREA: Southeast Area
  • COG#: 12484
  • Membership Level: Active
Re: highway peg for shorter, older rider needed
« Reply #3 on: February 03, 2017, 12:43:29 am »
See if this is better.
Logged

Offline TnRider

  • Bicycle
  • *
  • Posts: 133
  • AREA: Southeast Area
  • COG#: 12484
  • Membership Level: Active
Re: highway peg for shorter, older rider needed
« Reply #4 on: February 03, 2017, 01:07:35 am »
It allowed my knee to not be so acutely flexed without having to have my feet raised up.  No problem with dragging while cornering.  I used a piece of 1 inch square aluminum from Lowe's The black tape is where it hits the lower tubing of the tip over bar. I initially tried Murph's highway pegs but couldn't get them to work so I used them attached to the aluminum. Very comfortable ride when combined with my Rox risers.
« Last Edit: February 03, 2017, 02:18:27 am by TnRider »
Logged

Offline The Wizard

  • Been riding since I was 9 yrs.old.getting to be old fart.
  • Crotch Rocket
  • ****
  • Posts: 1475
  • 'match need with source(used parts)'
    • have a need find a source/parts are parts
  • AREA: Southwest Area
  • COG#: 11328
  • Membership Level: Active
Re: highway peg for shorter, older rider needed
« Reply #5 on: February 03, 2017, 07:48:28 am »
Okay :truce:  it appears :o that you are/must be resting your feet on them length wise  ::) instead of cross wise.I think I see :-\ the peg screws that allow them to arise to vertical(out of the way). Am I any where near correct :-[?   Jerry
Logged
1964 Honda 55,1971 Honda CL 100,numerous Honda 350 twins,1971 Honda CL 450,1974 Honda CB 750(stolen),1971 Moto Guzzi Ambasador/Velorex sidecar,1975 Kawasaki Z1B
1976 Honda Goldwing (fully dressed)1973 Honda CB 450,1982 Yamaha Virago 750
1977 BMW R100/7(full dress) later Velorex sidecar mounted,1978 Yamaha XS750,1987 BMW K100RS
1996 Honda shadow 1100 ace,2000 Kawasaki Concours,1998,99,98,98+88,90+99 Concours for resurrection           CDA#540

Offline TnRider

  • Bicycle
  • *
  • Posts: 133
  • AREA: Southeast Area
  • COG#: 12484
  • Membership Level: Active
Re: highway peg for shorter, older rider needed
« Reply #6 on: February 03, 2017, 10:30:41 am »
Okay   it appears  that you are/must be resting your feet on them length wise   instead of cross wise.I think I see  the peg screws that allow them to arise to vertical(out of the way). Am I any where near correct ?   Jerry

Yes, you are correct. Fred
Logged

Offline The Wizard

  • Been riding since I was 9 yrs.old.getting to be old fart.
  • Crotch Rocket
  • ****
  • Posts: 1475
  • 'match need with source(used parts)'
    • have a need find a source/parts are parts
  • AREA: Southwest Area
  • COG#: 11328
  • Membership Level: Active
Re: highway peg for shorter, older rider needed
« Reply #7 on: February 03, 2017, 10:13:30 pm »
So would it leave them to far forward if you turned them so you could rest feet on them cross-wise.I think just by turning the peg attachment bracket to the inside towards the bike.   Jerry
Logged
1964 Honda 55,1971 Honda CL 100,numerous Honda 350 twins,1971 Honda CL 450,1974 Honda CB 750(stolen),1971 Moto Guzzi Ambasador/Velorex sidecar,1975 Kawasaki Z1B
1976 Honda Goldwing (fully dressed)1973 Honda CB 450,1982 Yamaha Virago 750
1977 BMW R100/7(full dress) later Velorex sidecar mounted,1978 Yamaha XS750,1987 BMW K100RS
1996 Honda shadow 1100 ace,2000 Kawasaki Concours,1998,99,98,98+88,90+99 Concours for resurrection           CDA#540

Offline TnRider

  • Bicycle
  • *
  • Posts: 133
  • AREA: Southeast Area
  • COG#: 12484
  • Membership Level: Active
Re: highway peg for shorter, older rider needed
« Reply #8 on: February 04, 2017, 12:07:24 am »
"So would it leave them to far forward if you turned them so you could rest feet on them cross-wise.I think just by turning the peg attachment bracket to the inside towards the bike."   Jerry

Unfortunately yes. I've tried
Logged
Pages: [1]   Go Up
« previous next »