Author Topic: Bar Risers (Read 7132 times)

Ken_Fader_ON · « **on:** March 16, 2009, 08:59:00 am »

Has anyone put risers on the c14, and ifso do you have to change brakelines or any cables when you do it, does not look like alot to play with there.

David C-14 · « **Reply #1 on:** March 16, 2009, 03:34:00 pm »

No, you don't have to. I did it on mine and it feel great when riding.

Paul_Burks_GA · « **Reply #2 on:** March 16, 2009, 07:52:00 pm »

I just got mine this afternoon from the man in the brown truck. I hope to put them on tomorrow and test them out. Mine are the one's from Murph's. I'll let you know.

smithr1 · « **Reply #3 on:** March 17, 2009, 11:43:00 am »

Here are the ones Murph has. That is all I know about it. http://www.murphskits.com/catalog/product_info.php?cPath=130_133&products_id=282 ---------------------------------- South Central Area Director Email scad@cog-online.org

<p align="left">My Photos<br

Paul_Burks_GA · « **Reply #4 on:** March 22, 2009, 01:42:00 pm »

Got them installed this morning.....very easy......plenty of slack in the lines.

Ken_Fader_ON · « **Reply #5 on:** March 23, 2009, 08:51:00 am »

Just talked to the dealer where I purchased the bike They keep telling me that the cables are not long enough to put the risers on. So that they can not do this. thanks for all responses, guess I have to find a new service shop.

C14 Jeff · « **Reply #6 on:** June 01, 2009, 12:41:00 am »

What's the update on this?

Ken_Fader_ON · « **Reply #7 on:** June 03, 2009, 08:37:00 am »

Ended up getting risers from murphs installed in my driveway in about 25 mins, there was no issues with cables at all.

mabel · « **Reply #8 on:** July 02, 2009, 06:54:00 am »

Got mine from Murph's and put em on in about 20 min. made a big difference for me as I am havind wrist problems so it took a lot of weidht off my wrists

Cap'n Bob · « **Reply #9 on:** July 06, 2009, 06:20:00 pm »

Murph's on mine too! Bionic Bob COG & AMA member First C14 CDA member #0220 2008 C14 & 2003 Mean Streak

badinc1 · « **Reply #10 on:** July 12, 2009, 08:18:00 am »

I have the 2" Heli-Bar risers on my '09 Concours 14, but I had to drill and tap the right side riser to mount the front brake hose like the clutch hose is mounted. Didn't take long and works a lot better. Bob.

Devil Dog · « **Reply #11 on:** August 15, 2009, 09:31:00 pm »

I am curious about HELI Risers--specifically the 2 inch risers--will they work on 2008 Connie---does anyone have these?

thomasag · « **Reply #12 on:** August 19, 2009, 01:25:00 pm »

Yes, I have them on my 2008. They work perfectly Alan.

Ed King · « **Reply #13 on:** September 11, 2009, 07:08:00 pm »

I just installed on my bike tonight (Murphs Risers) very nice quality. The only question it looks like there is plenty of slack on the right line but the left is fairly tight, doesn't look like it makes much difference because it doesn't move from the bar to the mount (guide) but it almost looks to me like I could rotate the line outwoard on the handle bars which would give it more, there is a bolt there mounting it to the bars but I don't know if I undue that I'd leak something?

Magic-Rat_VA · « **Reply #14 on:** September 29, 2009, 12:11:00 am »

My bike came with them on (2009 bought used). I took them off. Don't know what make they are. They are a little over 1.5" high. Worked absolutely fine, I drove the bike with them on and it was just fine. I just like a more agressive riding position. If anybody wants them, I've got them listed on ebay ... Used Risers - Concours 14 - Rat

msa1956 · « **Reply #15 on:** October 03, 2009, 07:40:00 am »

They look like the ones I have on Mine ffrom Motorcycle Larry at Motorcyclelarry.com

Juscruizn · « **Reply #16 on:** October 26, 2009, 08:05:00 pm »

I have heli risers on my 09 c14. They have the 2 inch rise and 2 inch pull back. I really like them. I can't detect any difference in handling, but for me the comfort level has risen considerably. There were no problems mounting them, just follow the instructions. I can't see why they would'nt mount on the 08, they are basically the same setup. Reed

UP · « **Reply #17 on:** December 29, 2009, 12:43:00 pm »

I got risers from Murph too. The install instructions seem simple except for the front break part. Do I need to remove the front break junction box mounted to the fork crown then reinstall it onto the riser? UP

UP · « **Reply #18 on:** January 01, 2010, 06:12:00 am »

OK. Murph's risers install was easy. Looks good. Plenty of slack. You do have to relocate the clutch and break junction boxes to the risers. All parts included. Feels nice in the garage but a ride will tell the truth. UP

Steve_Reinschmidt_CO · « **Reply #19 on:** April 23, 2010, 10:23:00 am »

I just installed MCL riser blocks (www.motorcyclelarry.com) on my 2010 C14 ABS and it took about

Terry Wyss · « **Reply #20 on:** September 29, 2010, 08:47:00 pm »

I added Murph's bar risers on my 2009 C14 and it took about 30 minutes from start to finish. Real easy. They made a considerable difference in hand comfort on a 540 mile ride I did this last weekend. I highly recommend them.

JD Cunningham · « **Reply #21 on:** December 20, 2010, 02:13:48 am »

Got the Murphs risers for C14 on this weekend and what a difference! The riding position is perfect for me now (5'8" tall) Installing was relatively easy but be prepared to put some muscle into removing the Allen bolts that secure the bars! Also, use a 6 point socket to remove the brake line holder. I tried using the 10mm wrench that came in the tool kit and it was a disaster! Also installed the Cee Bailey Ultra Tour windshield (see other post)

Weg3111 · « **Reply #22 on:** December 30, 2010, 12:45:33 pm »

One more time. Murph's risers. 30 minutes to install. Same as everybody else said. Too bad my seat is in Florida. I'm really anxious to try them out.

Author Topic: Bar Risers (Read 7132 times)

badinc1