Author Topic: Highway pegs for Canyon Cadges  (Read 378 times)

0 Members and 1 Guest are viewing this topic.

Offline bigBen

  • Big Wheels
  • Posts: 6
  • AREA: Southwest Area
  • COG#: forum
  • Membership Level: Forum Subscriber
Highway pegs for Canyon Cadges
« on: December 15, 2018, 03:44:45 pm »
I recently installed Canyon Cadges.  I attempted to put highway pegs on them to no avail.  The ones I purchased are the inexpensive ones that have two horseshoes to fit either 1 inch or 1 1/4 inch bars.  The 1 inch couldn't be installed at all.  The wedges used to clamp against the bars would bind on the bolt causing the wedge to turn and walk the peg up or down the bar, scratching the power coating.  Even when installed I couldn't get tight enough to hold.  This was probably because the wedge was binding, thus preventing the clamp from griping the bar.

I have researched other types of pegs and the reviews indicate all seem to have a problem being tightened sufficiently.  I have the same pegs installed on my Harley with 1 1/4 inch bars and they work well, although those are chrome instead of powder coated. 

Any suggestions?

Offline Road Runner

  • Road Bike
  • ***
  • Posts: 307
  • Beep! Beep! ... YeeHa!
    • 2 Hearts for Integrity Ministries
  • AREA: Southeast Area
  • COG#: 12399
  • Membership Level: Active
Re: Highway pegs for Canyon Cadges
« Reply #1 on: December 15, 2018, 11:53:14 pm »
I recall Sailor Chic has a nice highway pegs' setup on her C-14.

Sailor Chic?
David L. Hamil
Athens/Decatur/Huntsvile, AL area
'13 ZG1400 "Metallic Spark Black"

Offline n3nman

  • Moped
  • **
  • Posts: 220
  • AREA: Southeast Area
  • COG#: 12142
  • Membership Level: Active

Offline bigBen

  • Big Wheels
  • Posts: 6
  • AREA: Southwest Area
  • COG#: forum
  • Membership Level: Forum Subscriber
Re: Highway pegs for Canyon Cadges
« Reply #3 on: December 16, 2018, 10:25:45 pm »
too bad for me.  My C14 is a 2018, so those pegs will not fit.

Offline FTB530

  • Street Cruiser
  • ****
  • Posts: 829
  • AREA: Southwest Area
  • COG#: 12127
  • Membership Level: Active
Re: Highway pegs for Canyon Cadges
« Reply #4 on: December 16, 2018, 10:33:07 pm »
too bad for me.  My C14 is a 2018, so those pegs will not fit.
Do you have Canyon Cages on the 2018? If so they should fit.

Offline Sailor_chic

  • Crotch Rocket
  • ****
  • Posts: 1556
  • AREA: Southeast Area
  • COG#: 11610
  • Membership Level: Active
Re: Highway pegs for Canyon Cadges
« Reply #5 on: December 17, 2018, 10:55:34 am »
Nicole     Port St Lucie, FL.
2013 C14 Black  
2006 Vmax
IBA # 60267

Offline Eric

  • Tricycle
  • Posts: 35
  • AREA: North Central Area
  • COG#: Forum
  • Membership Level: Forum Subscriber
Re: Highway pegs for Canyon Cadges
« Reply #6 on: March 18, 2019, 05:45:02 pm »
Lee,
Any chance you have a set of highway pegs left to go with the canyon cages?

Eric
2012 Concours - My new baby!
2012 CBR1000 - mostly my son's bike, but a fun ride!
1985 V65 Sabre - died in collision with a trailer
1983 CB650 - died in a head on with a 77 thunderbird
1981 KL250 - ridden to death

Offline n3nman

  • Moped
  • **
  • Posts: 220
  • AREA: Southeast Area
  • COG#: 12142
  • Membership Level: Active
Re: Highway pegs for Canyon Cadges
« Reply #7 on: March 18, 2019, 10:22:44 pm »
I am making a few more sets for a couple of folks and can have a few extra end of the week. PM me if interested.  Have have only heard good thinga from those that have used them. Thanks.
« Last Edit: March 18, 2019, 10:38:40 pm by n3nman »