Author Topic: 09 exhaust help  (Read 2859 times)

0 Members and 1 Guest are viewing this topic.

Offline ZG

  • I Need a Life
  • ******
  • Posts: 8233
  • AREA: Northwest Area
  • COG#: 9735
  • Membership Level: Active
Re: 09 exhaust help
« Reply #25 on: September 04, 2013, 03:15:51 am »
ZG posted the link!

 ;D :beerchug:
Yep, you did post it, and I went and looked.... and made my post, and thanked you in that post......went right over someones head tho,  so ZG do think ceramic coating on headers contains polymers? Or simply aluminum powder and a ceramic slurry suspended in a liquid that evaporates off during the bake process? Just asking..... :))

I haven't used them myself Rich, but I've been debating about it for awhile now, just posted the link cause I thought it was what the op was looking for. I know guys on the Gixxer forum that have sent stuff to them and been very happy with the results.

BAD A$$ isn't cheap, and cheap isn't BAD A$$...

Offline Bruiser

  • Bruiser
  • Sport Tourer
  • *****
  • Posts: 2545
  • kiss philosophy gets it done quicker and simpler
  • AREA: Northwest Area
  • COG#: Forum
  • Membership Level: Forum Subscriber
Re: 09 exhaust help
« Reply #26 on: September 04, 2013, 03:56:39 am »
G, I have a dumb question...did you spray it on while the exhaust was hot??  Do it cold, no prep is necessary.  Just lay on your side, rattle can that sucker, let it dry and problem solved...a nice blacked out exhaust header, that doesn't stand out when the bike is on its sidestand.  And with the slipon carbon Delkovic, the look is pretty nice.
« Last Edit: September 04, 2013, 04:03:08 am by Bruce »

2012 Kawasaki C14
93 Kawasaki C10
1982 Honda CX500 Turbo
1980 Kawasaki KZ1000ST
1978 Honda CB750F
1976 Kawasaki KZ400
1976 Honda 750K
1973 Honda CB500K
1973 Honda SL175
1972 Honda SL125

Offline G Man

  • Tricycle
  • Posts: 10
  • AREA: Southeast Area
  • COG#: 9554
  • Membership Level: Active
Re: 09 exhaust help
« Reply #27 on: September 23, 2013, 02:43:41 pm »
Outstanding replies to my post.  I appreciate all your comments and info.  I built my own "soda blaster" to prep my pipes once I get them off.  I am not planning to remove the Catalytic Converter  so I plan to only have the outside of the pipes from the cylinders to the Two Brothers Carbon Fiber slip-on coated in black ceramic.  Thanks for the link for the body fasteners.  I know I will need some of those through this process.  I will let you all know how it goes with pictures of the final product.  Thanks