Author Topic: brake pads  (Read 3445 times)

0 Members and 1 Guest are viewing this topic.

Offline dmlinpa

  • Big Wheels
  • Posts: 8
  • AREA: Northeast Area
  • COG#: 8064
  • Membership Level: Active
brake pads
« on: April 29, 2008, 12:34:00 pm »
Need to put new pads on the bike. Any comments on good aftermarket brands?  Are the OEM pads sintered? I was told that you must replace sintered with the sintered............   thank you  

Offline smithr1

  • I Need a Life
  • ******
  • Posts: 5078
  • AREA: South Central Area
  • COG#: 6197
  • Membership Level: Asst. Area Director
brake pads
« Reply #1 on: April 29, 2008, 01:26:00 pm »
Mr. Murph  http://www.murpskits.com/catalog/  has a selection of pads and seems to know what ones are good for what.  You might try and contact him or look at the site to see if it answers all.  I have no real help for the sintered question.    <p align="left">My Photos
 
</p>    
---
Bob Smith (smithr)
Austin, Texas baby!
2010 Kawasaki Concours, Midnight Blue
COG 6197, CDA 107

Offline PatM

  • Tricycle
  • Posts: 41
  • AREA: Northeast Area
  • COG#: 7292
  • Membership Level: Active
brake pads
« Reply #2 on: April 29, 2008, 10:32:00 pm »
I've just installed EBC organics.  I've since read the semi-metallic are a better choice for front brakes but so far I can't complain.  http://murpskits.com/catalog/product_info.php?products_id=161&osCsid=5a92af5eb278a0f05461a23d8e82870b  
Patrick    Ride safe.   
2009 Yamaha FJR1300A 
1998 Kawasaki Concours (Sold) Windsor Green   
COG# 7292 CDA# 0135

Offline Greg Habel

  • Crotch Rocket
  • ****
  • Posts: 1247
  • AREA: Northeast Area
  • COG#: 7010
  • Membership Level: Asst. Area Director
brake pads
« Reply #3 on: April 30, 2008, 11:14:00 am »
I'm using Carbone Lorraine sintered pads front/back from Murphs.  No issues.  Greg  COG # 7010/7010a (Tracey)  CDA 0120  Connie Droppers Anonymous Awards Dude (CDAAD)  Visit the CDA forum at http://www.cog-online.org/clubportal/mboards/viewtopics.cfm?clubID=1328&Forum=1123 99 Concours "Herrin Christabelle".  Rifle, TW fuel guage fix, Quick Fuel Tank Release, more
Greg H from Mass -  MA/ME/NH/VT co-AAD 2012+ with wife Tracey
COG# 7010,a Tracey  CDA 120 (3.0)  99 Connie "Herrin Christabelle"

Offline S Smith

  • Northeast Area Director
  • Officer
  • I Need a Life
  • ****
  • Posts: 5053
    • COG Northeast Area Home Page
  • AREA: Northeast Area
  • COG#: 3184
  • Membership Level: Administrator
brake pads
« Reply #4 on: April 30, 2008, 08:06:00 pm »
IIRC, the OEM pads are not sintered metal/    Over the years I have used EBC and Carbone Lorraine sintered metal (HH) pads and had no issues... they are very similar in performance and I recommend either..    The EBC Green are organic    One combination I tried was using EBC HH on the front and Green on the rear. The green provide less aggressive braking and did not lock up the rear wheel as easily sa with HH on the rear.    HTH    --  Steve Smith, #3184  COG Northest Area Director  (somewhere in south central CT)    If you're not living on the edge, you're taking up too much space.  
« Last Edit: April 30, 2008, 08:06:00 pm by SSmith_3184 »
| Steve Smith | COG #3184 | MSF/CONREP RC |

There is more to be gained by members raising hands saying "I'll do that" instead of pointing fingers saying "nobody's doing that."

Offline Slybones

  • Sport Tourer
  • *****
  • Posts: 2633
  • AREA: Northwest Area
  • COG#: 6953
  • Membership Level: Expired - Expired Term
brake pads
« Reply #5 on: April 30, 2008, 11:51:00 pm »
I now have EBC HH on the front and Carbone Lorraine on the rear. I have also used the CL's on the front. I like the current combo. The CL's are supposed to use a differnt sinter compound for the rear than for the front so they are not as grabby.  
2003 Concours, 121K
2005 GL1800ABS, 52K
COG #6953, IBA 28004

Offline danodemotoman

  • Sport Tourer
  • *****
  • Posts: 2439
  • Yo Ho, Yo HO, it's a bikers life for me!
  • AREA: Northwest Area
  • COG#: 2877
  • Membership Level: Asst. Area Director
brake pads
« Reply #6 on: May 03, 2008, 02:22:00 am »
  For the '94 and newer Concours:   The OEM pads are sintered, semi-metallic. The front OEM pads IMO are too abrasive for the rotor and the rotor will wear down prematurely. I use FA129HH EBC semi metallic on the front which have good performance but are less abrasive.   The rear can be easily locked up in a quick braking moment using a semi-meatllic pad so I use the FA 85 EBC organic (non-metallic). Plenty of stopping power for the rear but less likely to lock up the wheel.   Dan P