Author Topic: Clock Resetting when I turn off the bike  (Read 206 times)

0 Members and 1 Guest are viewing this topic.

Offline Mozzachio

  • Big Wheels
  • Posts: 7
    • Rider Training of NJ
  • AREA: Northeast Area
  • COG#: forum
  • Membership Level: Forum Subscriber
Clock Resetting when I turn off the bike
« on: July 28, 2018, 04:03:05 pm »
Yesterday I was out for a ride.  When I stopped to rest my clock reset back to 1 o'clock.  I reset it and continued my ride only for it to happen again when I shut down.

Anyone else ever have this problem?

Thanks for any advice you can give.

Mark
Back on a Connie-1000 after ten years on other bikes.

Former bikes
LTD 440, GS740E, Hawk400, LTD 1100, Pacific Coast, 01 ZG1000, R1200GS, ST1100, NC700X

Offline Harry Martin

  • ☺ Cartoonist ☺
  • Industry Member
  • Crotch Rocket
  • *
  • Posts: 1413
  • Fear is not boring
    • Harry Martin Cartoons
  • AREA: Northwest Area
  • COG#: 4090
  • Membership Level: Active
Re: Clock Resetting when I turn off the bike
« Reply #1 on: July 28, 2018, 04:20:26 pm »
Check ACC power to clock. Loose/dirty connection or fuse.
Power should be there when bike is turned off.
Harry in Wild and Windy Casper, WY - 2015 "Greendammit"
https://harrymartincartoons.com

Offline Mozzachio

  • Big Wheels
  • Posts: 7
    • Rider Training of NJ
  • AREA: Northeast Area
  • COG#: forum
  • Membership Level: Forum Subscriber
Re: Clock Resetting when I turn off the bike
« Reply #2 on: July 28, 2018, 07:05:53 pm »
I figured it out.  The fuse for the auxiliary connection under the seat was toast.  I must have done it when I was securing the charging port I have for my passenger.  I checked the schematic and realized they were connected.  I was surprised the clock worked at all but it did when the bike was running.

Thanks anyway.

Mark
Back on a Connie-1000 after ten years on other bikes.

Former bikes
LTD 440, GS740E, Hawk400, LTD 1100, Pacific Coast, 01 ZG1000, R1200GS, ST1100, NC700X