Concours Owners Group (COG) Forum

Concours Discussion (C10 / ZG1000 / 1000GTR) => Accessories C10 => Topic started by: Mo on July 21, 2018, 10:03:48 pm

Title: Mondomotos 10MM Bullet Lights
Post by: Mo on July 21, 2018, 10:03:48 pm
To all,

I purchased a set about 4 years ago and finally one of them took a dump. I was looking to replace one or both but it doesn't appear that they are in business anymore. Has anyone had any luck? Are they still in business? Thanks and God Bless.

Moe
Title: Re: Mondomotos 10MM Bullet Lights
Post by: MAN OF BLUES on July 21, 2018, 10:55:12 pm
I think you mean MM10, and I think MondoMoto went O.O.B.

they had good stuff...
next best replacements are ADVmonster product lights..

great quality, realistic prices.
http://stores.advmonster.com/led-lights/ (http://stores.advmonster.com/led-lights/)

and updated to modern tech...

good luck,
Title: Re: Mondomotos 10MM Bullet Lights
Post by: Mo on July 22, 2018, 04:57:32 pm
Man of Blues,

You would be correct sir and I checked out that website. Looks like they have almost exactly the same. I'm just curious if the connections are the same? Thanks and God Bless.

Moe
Title: Re: Mondomotos 10MM Bullet Lights
Post by: Gscott on July 23, 2018, 08:34:43 am
The lights I got from advmonster had bare wires no connectors.
Title: Re: Mondomotos 10MM Bullet Lights
Post by: MAN OF BLUES on July 23, 2018, 04:09:02 pm
The lights I got from advmonster had bare wires no connectors.

I think you mean they just had no connectors, not bare wire..
contact ADVMonster about polarity, but likely the insulation on the wires would be red + and Black -, and you should mind the polarity when wiring to the bikes harness, If in doubt, ask, or check the book/manual on polarity of the bikes wires.
Title: Re: Mondomotos 10MM Bullet Lights
Post by: Gscott on July 23, 2018, 05:43:31 pm
Stripped ends would make more sense
Title: Re: Mondomotos 10MM Bullet Lights
Post by: mr t on July 28, 2018, 08:33:19 pm
My MM10 bullet light just stopped working today. There is power to the light. Is it at all possible to replace the Cree chip from the front? Forgive my ignorance, but I don't see any way.

  Tom Taylor COG#7173
Title: Re: Mondomotos 10MM Bullet Lights
Post by: Mo on August 07, 2018, 06:28:24 am
Mr 1,

I took it apart and it doesn't appear to come out and it doesn't appear that they are in business anymore. I finally went to advmonster website with great success. Ordered MM 20's and connections appear to be same as mondo motos. I'll try and hook up this weekend and update. If you give me your email, I'll forward the email the company recently sent to me. Take care and God Bless.

Mo
Title: Re: Mondomotos 10MM Bullet Lights
Post by: mr t on August 07, 2018, 07:37:22 pm
Mo- Being a frugal {cheap} Cogger, I ordered 2 Xprite 2 inch 10 watt Cree lights through Amazon. Under $20 for 2 with free shipping. I installed one today and it seems to be as bright as the MM10. Lets see how long it lasts.

     Tom Taylor COG#7173       AKA mr t
Title: Re: Mondomotos 10MM Bullet Lights
Post by: Mo on August 18, 2018, 10:49:31 am
Mr T,

Nothing wrong with being frugal lol. I recently installed those 20 bullet lights from ADVmonster and so far so good. The connections on the old matched up with the new and appear to be just as bright. I'll keep everyone advised. Take care and God Bless.

Mo