• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

Ronnie's pegs - SOLD.

Just Cliff

Just Cliff

Member
Member
Ronnie pegs in good condition, $225 shipped lower 48. No instructions, but pretty straightforward & probably a video on YouTube. These fit all years, but they will not work on 08 - 09 if cages are installed otherwise they fit.
 

Attachments

  • 20230814_153140.jpg
    20230814_153140.jpg
    239.1 KB · Views: 116
  • 20230814_153125.jpg
    20230814_153125.jpg
    208.9 KB · Views: 116
  • 20230814_145715.jpg
    20230814_145715.jpg
    110.6 KB · Views: 118
  • 20230814_145736.jpg
    20230814_145736.jpg
    118.8 KB · Views: 123
Last edited:
...and if anyone is concerned they won't fit with a peg lowering kit, I can vouch they will, BUT you will have to modify them a smidge(technical term), for the shifter linkage. I used a large drill bit and made the opening big enough to route the linkage thru.. a little work with a dremel helped as well.
 
Konehead34 said:
...and if anyone is concerned they won't fit with a peg lowering kit, I can vouch they will, BUT you will have to modify them a smidge(technical term), for the shifter linkage. I used a large drill bit and made the opening big enough to route the linkage thru.. a little work with a dremel helped as well.
Click to expand...

Good to know, thanks!
 
You must log in or register to reply here.
Top