• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

96 gpz1100 carbs.

M

Motorcyclerider

Member
Member
Installed the gpz1100 carbs with the oem jetting and needles. 110 main stock needles, 35 pilot. Main seems ok. Migh try a 112 or 108 eventually but the pilot was lean. Added an extra inch of foam to the left side on top of the 1”3/4 that was already in the right side. Cleared up the lean condition. Superb power 3k rpm to 8 k rpm. Better then the 32’s maybe just a tough flatter nearing redline. Very happy. Little more tuning to do then onto cams.
 
You must log in or register to reply here.
Top