• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

Rear axle hex head size

jmilazzo

Guest
Guest
Hey all,
Happy Spring! Real quick question for you guys......I have to change my rear tire (wound up only getting 5300 miles on my Perelli Angle ST) and I have to buy a hex head for the rear axle? Is it a 19mm or 20mm?
thx,
J-
 
Have you tried to get the axle nut off? I have yet to need a hex wrench for the left side of the axle. Been able to torque the nut with out putting a hex wrench on it. HTH...
 
I've never had to hold the axle with a hex either.
Changed a rear tire yesterday, and it wasn't needed.

I think the Hex would be 14 MM, and there is a chance a 9/16" would work.

Ride safe, Ted
 
Top