• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

Sold --- For Sale Project D Concours 14 '08-'09 Extreme Frame Slider

Loren

Loren

Moped
Industry Vendor
These are take offs from my '09 I recently purchased.  Used parts but never used on the asphalt.  $95 shipped to CONUS.

On the bike before I removed them.
IMG_3708.jpg


Now, with mounting hardware.
IMG_3746.jpg


Link to Project D
http://projektd.com/product_info.php?products_id=71

 
Would you mind elaborating a bit on the install? Do you have to remove fairing bits?  I'm very much interested in these.
 
Yuri, I do have the install instructions.  Here is one page showing some details.  The side fairings (ones with the fins) need to come off for access. 

Slider%20Install.JPG
 
Any chance you have some experience or can relate someone else's with regards to their actual protection capabilities?
 
The bike has over 22K miles on it and there is not a scratch on the fairings.  I have only had the bike a couple of weeks.  Here is a members post about a 40mph low side and the sliders with photo link.  Looks pretty darn good for a 40mph get off. 

http://forum.cog-online.org/index.php/topic,25484.msg122245.html#msg122245

I replaced them with the Top Block sliders because I liked the way they looked, but they also cost over $700 with the exchange rate and shipping. 
 
You must log in or register to reply here.
Top