• Can't post after logging to the forum for the first time... Try Again - If you can't post in the forum, sign out of both the membership site and the forum and log in again. Make sure your COG membership is active and your browser allow cookies. If you still can't post, contact the COG IT guy at IT@Concours.org.
  • IF YOU GET 404 ERROR: This may be due to using a link in a post from prior to the web migration. Content was brought over from the old forum as is, but the links may be in error. If the link contains "cog-online.org" it is an old link and will not work.

Torque spec chart? looking for a few numbers

Strawboss

Strawboss

Member
Member
I have a C-14 shop manual on order but I'll be bolting up my wheels in a few days. I searched here and online, I need some torque specs on 6 specific fasteners if anybody can help. Thanks.

Found some numbers do these look about right?

1- front fork pinch bolts 15ft lbs
2-front caliper mount bolts 25ft lbs
3-front axle bolt 94 ft lbs
4-rear axle bolt 94 ft lbs
5-rear caliper mount bolts 18 ft lbs
6-rear caliper anti-torque bolt 47 ft lbs
7-rear caliper sensor 40 in lbs
 
Last edited:
From my service manual, they all look correct, except I can't find the spec for the sensor?

1- front fork pinch bolts 15ft lbs- Correct - Alternating
2-front caliper mount bolts 25ft lbs - Correct
3-front axle bolt 94 ft lbs - Correct
4-rear axle bolt 94 ft lbs - Correct
5-rear caliper mount bolts 18 ft lbs - Correct
6-rear caliper anti-torque bolt 47 ft lbs - Correct
7-rear caliper sensor 40 in lbs - ?
 
Last edited:
OK, great, not sure where I saw 40in lbs. Service manual arrives in 2 weeks, tires getting mounted tomorrow. Thanks so much!
 
You must log in or register to reply here.
Top